I have too many projects going at once. I think I need to build a plane til before I do anything else.
Printable View
I have too many projects going at once. I think I need to build a plane til before I do anything else.
I started a little bookshelf for a friend two months ago. I hadn’t done dovetails in cherry in over a year, so I struggled fitting them and ended up splitting both the side panels. I set the whole thing aside for a while, used butterflies to patch the splits, and just need a little sanding and wax to call it done.
Attachment 441052
it isn’t perfect, but I think she’ll like it. Also, since I’m a glutton for punishment I decided to make a little tool tote out of the excess cherry we got for this project and use it to learn how to do compound dovetails. Since I occasionally learn from my mistakes I’m making a little tray out of pine first to figure out the technique.
Attachment 441054Attachment 441055Attachment 441056
Also, I finally knocked up a clamp rack, so now I can buy more clamps.
Attachment 441057
.... I built a saw till out of excess plywood I had laying and pocket holes (shh🤭). I've been moving plywood I've had for five years and was tired of all my saws in a pile. I forgot how quickly one can build something out of sheet goods and pocket holes.
I made progress on my saw till.
Comments about the entire thing... the previous owner left a bunch of random cuts of doug fir when he left, along with some 4" wide rough hewn pine boards. My stupid self decided to use this found wood for this project. I say stupid because the fir was either rock hard (and seriously tough on the chisels and irons) or would warp and twist very shortly after it was dimensioned. I didn't quite get it together fast enough, so one side's a couple degrees out of square. Oh well, it's shop furniture and really was also a project to 'get back into it' after having tools packed away for a couple years.
It did let me use the 'new to me' #45 I have though, that was cool.. Oh and if Ken reads this... I did kind of enjoy sharpening all those irons, and yes.. it was all freehand after I ground them square and to a 30º bevel angle. That was my weekend, I hope everyone else also had some fun.
https://photos.smugmug.com/photos/i-...-NF3NXQ2-L.jpg
Mike,
Good on you for getting your cutters sharp, the correct way:).
I've just one gripe, your shop fixture is too nice. To do it correctly it needs to be put together with biscuits and/or pocket screws and cheap plywood. For reference on how to do it see mine :p.
ken
Making a cherry tool tote. More fun with compound angles. The side you carry near your leg is vertical and the ends have a little more splay than the other side. Plus I decided to use slips to hold the bottom in. Since the sides are 1/2” I didn’t really want to plow a deep groove directly into them.
it will have a central divider that I’ll attach the handle to and I’ll put some smaller dividers in one half of it to keep smaller items organized.
Attachment 441309
"Lumber" has been bought...at least enough to start building a case for the taps & dies....
Attachment 441311
Once I can clear enough room to sort through all the taps....table is full of GrandBRATS' school stuff..
Attachment 441312
Then figure out a good layout...and wait on Moose & Squirrel to deliver a Paper Plan.....also, need a case for the Pipe taps..
Attachment 441313
Also out of Poplar....
Finished this little tool tote. It was a fun experiment with compound angle dovetails and miters. I set the bottom in to a mitered frame so I could keep the sides full thickness. That ended up being pretty fussy and the end result wasn’t perfect. I’ve got a few ideas about how to do better next time.
Attachment 441747Attachment 441748Attachment 441750
Ben, nice tool tote. Would be interested to see it decked out with kit.
About halfway done on the first box..
Attachment 441834
Glue ups are underway.....
Thanks! I made it for a friend who likes working on motorcycles, so I think he’ll use it for small mechanic’s tools. I left it pretty un-divided since I’m not really sure exactly how he’ll end up using it.
Starting a little tea box for my daughter for Christmas, copying a Mike Pekovich piece. Attachment 441859Attachment 441860Attachment 441861
Thanks all for keeping this thread going.
Looks good Josh, I like Peckovich's design sense.
I've been set back with more sheetrock-but for good cause. My house had a small climbing wall that my boys were a bit too big for but not big enough to let go for the first two years. I sold it and had to throw up another sheet of rock and now have a bit of painting.
I did manage to make a 'one-joint' desk using some metal legs my partner had. I'll post details separately; here's the finished desk:
Attachment 441886
I have been building a TV cabinet for the kids apartment.
Attachment 441911Attachment 441912