I spent a hunnerd bucks on some parts today..Got the bearings and intermediate (jack-shaft)...
http://i158.photobucket.com/albums/t.../bigpulley.jpg
Close up pic with the cell phone:
http://i158.photobucket.com/albums/t...diateshaft.jpg
The intermediate shaft is 1" and will carry the 18" pulley as well as a 6" pulley and I will need to have a key-way cut in it and then I'll cut the shaft to length when I determine the apropriate length.
The 7/16" all-thread will go all the way through the headstock and hold both flange bearings.
I also picked up the 3/4" all-thread that will hold the ways.
Still waiting on the sheave and bushing for the primary drive on the headstock so I can have the 1-3/4" shaft made.
More to come:D