Considered it awhile ago, but I have zero budget for it, given the higher cost for the electrical service due to materials price increases and opting for the spray foam. I'm fine with the floor. It's smooth and easy to clean.
-----
So after moving the G700 down from the temporary gara-shop this afternoon, I set up a little cutting center to work on the window and door boxing/trimming out. So I guess you can say that the new shop is "officially up and running", although there's a lot of floor showing and only one major tool plus the DC and compressor in there so far.
One again, the Big Orange Power Tool did all the heavy lifting...
Attachment 491695 Attachment 491696
I picked a location to set things up and...set things up...including installing some nice shoes on the saw.
Attachment 491697 Attachment 491698 Attachment 491699
Time to fire up the saw and actually cut something...so I started working on the window boxes. I'm fortunate, that this whole thing for the windows is totally a crosscutting operation, too.
Attachment 491700
I guess I can call this slider a "multifunction" machine, 'cause it's also an assembly table today. :) :D
Attachment 491701