I got XTR01Z, probably the best one I've ever used. Very powerful and 30000 RPM matters
Printable View
I recently bought a Milwaukee 18V battery operated trim router (my first); boy, talk about handy! Plenty of power. I just wish they came with a 1/2" collet so I didn't need to buy new bits to use in it.
I think my trim router is most used now. I needed some 1/4" X 3/4" dados in plywood. Loaded up a 1/2" straight bit with 1/4" shank, set the depth and went to town. Plenty of power and light enough to be nimble. I bought an aftermarket extended sub-base with 2 handles which is handy.
And soon you may add a Bosch cordless trim router to your Arsenal. On delicate things that don’t require the power, not having to worry about the cord is great.
I love my Porter Cable trim router for gaining hinges for flush cabinet doors.
For the record, I loved using my Makita trim router. My very talented carpenter SIL had noticed I didn't have a trim router so he gave me the battery version of the Makita so now I have a corded and cordless version of the same router. The cordless version has an LED lighting the area.
My biggest beef against cordless tools in general is that batteries are so expensive and fail most often when the need to use them is the greatest.
had a whole heard for a while. Tons of Makita. Have the porter cable ones and think they are Rockwell quality from before bought out. I burned out Makitas but never the Porter cable ones. dont remember the model but likely the 130 mentioned, heavy and strong enough well made stuff from the past.
“My biggest beef against cordless tools in general is that batteries are so expensive and fail most often when the need to use them is the greatest.”
--Ken Fitzgerald
Agreed! Back in 2019, I needed a replacement battery for an old DeWalt flashlight. Light still worked, but battery was not to be found as DeWalt discontinued the light and the battery. On a whim, I stopped at a Batteries & Bulbs store. None in stock, but catalogue listed a Rayovac clone with a one-year warranty. About five days after order, I had the battery.
Speaking ‘bout trim routers, I have an older Porter-Cable laminate router with an aftermarket Woodhaven 2 handed base that accepts the Porter-Cable guide bushings. Woodhaven has bases for other brands.
https://www.woodhaven.com/products/w...-bushing-plate
I love my Makitas - but - the fixed base micro adjust is crude at best. There are far better ones they could knock off (IMHO).Quote:
Makita must be pretty good, that's the one China picked to knock off ;)
I dont too many burned out might be better now but the taste remains. Not close the the porter cables.
The tool that scares me the most is my power plane. The reason is that when I use a hand plane, the fingers on my left hand tend to go under the plane and ride along the wood. It doesn’t hurt with a hand plane but I would be asking for trouble with an upside down jointer. I try to be very careful. I’m also trying to break myself of the hand plane habit.
I have that Makita trim router and really like it. I have used it to cut shallow dados with a dado jig and a pattern bit. Works great.
Attachment 457396Attachment 457397Attachment 457398