Originally Posted by
Rush Paul
Your plenum setup should not be a problem. I used a plenum set up with my CV1800 in my basement shop because I didn't have enough ceiling height. Worked just fine. And, as you've no doubt seen, many other Clear Vue owners have run their exhaust into a plenum to connect the filters. If you're at all concerned about your plenum being a choke point, just run test by disconnecting whatever duct you have running from the outtake of the blower assembly (the exhaust) over to your plenum. The cyclone does not need the filters in place to operate, but if the exhaust is blocked to some degree that would certainly impact your system's air flow.