This is one of my projects, and I'd have to say, as of now, 'most proud'.
Printable View
This is one of my projects, and I'd have to say, as of now, 'most proud'.
It's hard to pick a favorite. Here's a blanket chest I made for my married daughter and one ow two night stands I made for my wife.
Attachment 278760Attachment 278761
I love your clock Rick. I made a mantle clock as a house warming gift for my son & daughter-in-law, but I like the face of yours so much better. I was pretty satisfied with the case (I made it from a really nice single billet of tiger maple), but the face I picked was fairly plain. I originally picked it because I didn't want anything to detract from the case, but in retrospect, I think I would have preferred something with at least a little more character.
Attachment 278790Attachment 278791Attachment 278792Attachment 278793Attachment 278794
This isn't my proudest necessarily - but it was my first attempt at inlay and it turned out nice enough that it inspired me to continue to do inlay on projects that came afterwards. This one get a lot of attention due to being on our dining table.
I just find it interesting that sometimes when we try something new - that "new" thing can influence our projects for years to come.
Attachment 278805
Cherry and QS sycamore jewelry chest I made for my mother and gave to her as a gift 2 Xmases ago. It was inspired by several jewelry chests my grandfather made for my aunts. He's still around, but he stopped making them before my mom ever got one, so I made a similar one but of my own design.
Attachment 278813 Attachment 278811
Archery case (Ascham):
Attachment 278818
Needed a case to fit my Bear Custom Kodiak T/D and other gear, so my first project since high school shop three decades ago:
- 34 ˝” x 11 ˝” x ~3 ˝”
- red oak boards and 1/8” plywood floating in grooves/dadoes
- uses solid brass hardware throughout (save for the hidden (old-style Stanley) bullet catches and their strike plates, and Chinese rare earth magnets)—- handle: England, stay chain: Italy, hinges and ball catches: U.S.A., catches: Taiwan, corner protectors: unknown, probably China (the bow and everything else is made in the U.S., save for the arrows from Korea)
- rare earth magnets in the arrow holder to keep the arrows in place
- I’ve since installed brass corner protectors
- dovetailed corners for the case, dowel joints for the arrow holder
- all hand tools, save for an electric drill to drill the holes for the arrows
Had to pre-finish the arrowholder and inside of the case (incl. groove / dadoes) since the arrow holder is hinged on 3/8” dowels (lubricated w/ bee’s wax)
Next one will use rare earth magnets w/ a countersunk hole, so arrows can be slightly longer (but I’ll need to put some sort of washer or grommet in the countersink to keep points from chipping the magnet?)
I’d like to source (or make) formed (not flat) solid brass strike plates—- suggestions?
I’d also like to find a key lock which would fit in the less than ˝” stock.
The next version won’t have the dividers (instead, I’ll make a wooden box and brass clips to hold it in place on the right) and I’ll probably shorten the arrow holder so it falls at the half-way mark. I’ll also probably inset the catches. It also won’t be ebonized—- suggestions for dark finishes for red oak?.
Considered insetting the corner protectors and countersinking screws to attach them, but that’s a lotof screws.
Still not happy w/ the foam insert I cut (and I’ve since replaced the black cloth w/ green felt)—- considering making one of papier mache and covering that w/ flocking—- other alternatives?
This is my favorite at the moment.
Attachment 278863Attachment 278864Attachment 278865Attachment 278866Attachment 278867
This time next year I hope to have a new favorite.
This is my favorite. Waterfall Bubinga with walnut.
Attachment 278898Attachment 278899
My dad wanted a big desk, so we went back and forth forever to refine a design, finally got it detailed out:
White oak burl tops, crotch oak doors, figured oak panels, and quartersawn framing:
http://www.sawmillcreek.org/attachme...0&d=1285212599
http://www.sawmillcreek.org/attachme...1&d=1285212599
http://www.sawmillcreek.org/attachme...7&d=1285212490
http://www.sawmillcreek.org/attachme...3&d=1285212654
Alex, are there drawers just at the end sections? It would appear from the front you couldn't open more otherwise.
It is tough to see, and I don't have any good photos of the finished setup on the drawers, but the end cabinets are set up so you could put a computer in either one. There are vent holes in the bottom of the cabinet, and the underside of each is fitted with a slot for an air filter, and on the inside (where your feet go) are ports for USB powered fans. So when you turn on the computer, the fans turn on, pull fresh air in through the filter and circulate it in the cabinet.
http://www.sawmillcreek.org/attachme...1&d=1282825738
Each cabinet is set up this way, and there is a removable/modular drawer unit that can fit in either side opposite of where the computer is, so you can switch which side you want the drawers, and which side you want the computer.
http://www.sawmillcreek.org/attachme...9&d=1283173146