-
5 Attachment(s)
So, a PIP? Letting the "Gunstock" dry overnight....will see about a top coat of some sort...tomorrow...
Front View...
Attachment 441985
End view..
Attachment 441986
Note the grain direction on the end of the lid?
Lid view..
Attachment 441987
Then open the lid..
Attachment 441988
And look inside....
Attachment 441989
Letting things air out, so the insides will dry, too....
need to design a name plate to add to the holder....and figure a way to add on inside the lid, to hold any paperwork, size charts...
Stay tuned
-
1 Attachment(s)
Thanks. Waiting on the finish to dry, before I can start on a smaller box for the Pipe Taps and the pipe Die...
Attachment 442015
May lay the 2 big ones down,,,stand the rest up...and drill a 1" hole for the single die I have....Still have enough Poplar to build the next box...
Stay tuned...
-
First coat of clear gloss poly is applied,,,,waiting on that to dry a bit...then see IF it will need a second coat...
Since the varnish was out, and the brush was handy...had a few other wood handles in need of a bit of finish....bench is now full of sticky, smelly objects....
-
This project makes me realize how much I hate blow molded cases. This case is just so much better. Thanks.