Recommendations for a Jet JWBS-16B?
Wow, you guys have inspired me to upgrade from the crappy factory blade on the Jet 16" that I bought last year. It's one of the newer steel frame saws, and according to the specs it can handle 1/8" to 1.5" blades.
Here's what I'm thinking so far, going all bi-metal blades:
1/4" Diemaster2 .025 thickness, 6 tpi skip tooth for most curves
1/2" Diemaster2 .025 thickness, 6/10 variable pitch for general purpose use
I'm unsure on a blade for resaw, I'm thinking the 1" Woodmaster B either 1.3 or 2 tpi blade .035 thickness would probably be fine, and I can go as high as the 1.25" blade and still have the .035 thickness (1 or 1.3 tpi). Going to 1.5" gets me .050" thickness and 1.1 tpi.
Any comments or recommendations for resaw blades on this saw?
Thanks!
Dave Stuve