Printable View
I have a question about dimensions. I drew up this amoire but when I insert the dimensions, they are way off-
I have the unit tools set on Architectural and 1/16"
I tried to upload the picture but the kb is too high and I dont know how to shrink the kb on a sketch up picture.
Thanks
Dave
Dave, go to you Model Info window and change the units to Fractional, 1/64" and uncheck Enable length snapping. You might need to redraw or at least make adjustments to your drawing. This would be especially true if you have snapping enabled.
Let me know if you have more questions. You could e-mail me the SKP and I could take a look at it for you.
Dave