7 Attachment(s)
Wall Mounted Jewelry Cabinet
For a friend. She has a lot of rings apparently since "lotsa ring pegs" was one of the design parameters. She sent me photos of their current bedroom furniture, the location where this will mount to the wall, and asked me to make her a "Glenn-type" cabinet that would fit in.
Attachment 506982
I made one of those door hanging helpers out of Woodsmith magazine. Glad to report that this thing really is a big help.
Attachment 506981
Door and pulls on.
Attachment 506984
I made off with some of the wife's stuff to show how the thing works. The owner has a large collection of family rings. I scrounged every ring I could find and didn't even have one for each peg let alone multiples but, you get the idea.
Attachment 506983
Details of the ring-peg tilt-out.
Attachment 506987 . Attachment 506986
Overall view
Attachment 506985
So, primarily walnut and maple. Ebony plugs on the sides, brass rods for the tilt-out and pull pivots, brass screws for the pulls, and antique brass for the hanger hardware and hinges. The pulls are walnut saddles with bocote pendants.