I took some classes in making windsor chairs and would like to continue with that but I'm having a hard time sourcing wood. Does anyone know a source for suitable red oak, or similar, logs in Maryland or nearby?
Printable View
I took some classes in making windsor chairs and would like to continue with that but I'm having a hard time sourcing wood. Does anyone know a source for suitable red oak, or similar, logs in Maryland or nearby?
I would seek out small family run saw mills. Must be some around.
That is where all my furniture wood comes from.
I am too far away to be any help. Windsor Chair posts always make me want to watch the movie The Patriot again (and to get up my nerve to try a Windsor Chair).
Lot of different woods have been found in old Windsor chairs. It didn’t have to be highly esteemed wood …just wood that steams good…
Beech was often used for steaming ,while North-Eastern white pine made good seats , which were warmer to the flesh parked there
than fine Rosewood !
You might try contacting tree trimming services or tree removal services.Quote:
Originally Posted by William Collier
Look for services that take care of downed trees from storms and such. You might even ask an insurance broker who they would recommend.
jtk
Woodmizer has a sawmill locator on their website.
Elia Bizzaria sells split blanks. https://handtoolwoodworking.com/tools-and-supplies/ I have not bought from him.
I’m up in PA and started this same process making Curtis Buchanan democratic chair. I had luck searching for log yards and found one in Ohio, about a hr drive for me. Y&B logging.
Anyhow look into logging companies.
Good luck!
I am shamefully uneducated on chair making. I have been processing Black Locust by cutting logs into fairly short sections and splitting them within a few days of cutting. As soon as the first cracks appear in the end, I drive in a wedge and break the log down into eights, tenths, or twelfths. This is encouraging me to try some longer billets. Would 6 feet be long enough for a Windsor?
Maurice, I am working on my 15th Windsor. I have done sack backs, fan back side chair, fan back arm chair, continuous arm and comb backs. All of the legs are about the same length and 24” is a good length for those. Stretchers about 18” and arm supports around 15”. Those are the maple parts. The longest length for spindles is about 34”. However, for the parts that are bent it depends largely on the style. Crests - probably 35” would work for any of them. Then, there are arm rails, bows, and continuous arm rails. 65” would be plenty for the longest of those those.
You would be ahead to do the bends while the wood still has some moisture content.
Your best option is to talk with local tree service / removal companies.
The problem with buying from a log concentration yard is that they deal with long logs. Versus a tree service company that frequently cuts them down to 3 - 4’ in order to handle them.
Thanks John! I just watched a couple of the splitting and bending episodes on Harry Rogers youTube channel. I am going to try splitting a 65 inch green log.
You should watch watch Curtis Buchanan’s videos - https://m.youtube.com/user/curtisbuchanan52
Look for Blake Lowery out in Texas. He teaches classes on the Democratic chair and I believe he is started to sell just the raw materials.
I managed to get some long split billets that just might make a chair back. Black Locust is not a very pretty wood. I think I will start with a rustic chair (hailing from Windsor Missouri, which is not far away)
Attachment 493860