Printable View
Hi All,
Newbie woodworker here with a question about a new plane I just bought.
I just bought a Stanley #5 jack plane, and on the plane the frog adjustment screw is drilled out of center, and this is causing the frog to sit slightly off to an angle.
Is this off angle negligible with adjustments that can be made? Or should I return the plane for a new one?
thanks in advance.
Attachment 446088Attachment 446089
Adjustments are possible but just return it.
It could probably be made to work if you got it for 20 dollars, at a garage sale, to be used for grunt work. But as a beginner, you may want to get something that needs less fiddling.
You might be able to get it to work, but it's an aggravation I wouldn't accept in a new tool. I vote exchange it for one that's right, (and if they're all bad just return it!)Quote:
Originally Posted by Mark Sowlles
If it can be returned, it should be.
This makes me feel better about an old type 16 #5 in the shop. Definitely not my favorite #5. It is set up as a scrub plane.
jtk
One thought, if the screw holding the adjustment plate can be loosened and allows for the frog to be rotated, then it may only be a matter fo adjustment.
jtk
I was actually able to do this, and it seemed to sit pretty straight afterward but I feared it may just work itself crooked again so I decided to return it and order another one which will hopefully be less hassle. Thanks for your responses though!Quote:
Originally Posted by Jim Koepke
Thanks everyone for the quick responses! I was able to return it and ordered a new one. Knock on wood the next will be in ship shape!