I am redoing some solid fir panel doors. 3 of them the door knobs have a set screw that holds the knob on but one set has no set screw. Any ideas how to get the knob off
Thanks
Al
Printable View
I am redoing some solid fir panel doors. 3 of them the door knobs have a set screw that holds the knob on but one set has no set screw. Any ideas how to get the knob off
Thanks
Al
If there is a small hole near the base of one of the knobs you would insert something like a small nail to release the knob. Other types may have a small slot that catches a release tab; same deal, press in on the tab with a small screwdriver to release. You may have to loosen (remove screws or unscrew) the escutcheon(s) to see how to release the knob....
Can you post photos of the knobs on each side of the door with views from the top and bottom?