8 Attachment(s)
I restored a Millers Falls No 2
I found this drill in an antique store for $20 and decided I could breathe some new life into it. I soaked everything in Evapo-rust and then either painted or sanded/polished all the parts. I scraped and sanded the old damaged finish off the wood. I was hoping for rosewood but didn't get that lucky. I finished it with General Finishes antique walnut gel stain and Arm-R-Seal.
I'm really excited to put it back into service. Some before and after pictures
Attachment 412349
Attachment 412350Attachment 412351Attachment 412352Attachment 412353Attachment 412354Attachment 412355Attachment 412356