Printable View
Has anyone done business with Sulphur Grove Tool? They seem to have the correct tires at a decent price for my 14" Delta Model 28-274C. Their tires are 1" wide and 0.095 thick which is the closest match I found for what was/is on the saw. Their customer service says they will fit my saw. I was referred to them by two of the other suppliers I contacted. I will be replacing both tires with new urethane tires.
Yes I've checked out a number of other suppliers.
They work fine. They're on my 14" Delta, and one of the 10" saws on one wheel. I think they were a little wide for the 10" saw, but I did some rough trimming in place with a utility knife after it was on, and no worries.
Yes, a couple times. Good service and the products worked, including tires for my 17" saw
I've used their tires on 3 saws now, no problems and they don't seem to wear at all even after years. I have bought them through eBay as I recall, not directly from SGT.
I've not done business with them but I do remember them being recommended for BS tires in several past threads.
I bought tires (for my 18” Rikon) directly from Sulphur Grove. The tires are good.
What I didn’t know till later was the price direct from the company was significantly higher than the identical Sulphur Grove tires from a reseller. This seemed odd to me. I sent an email asking about this but they did not respond. I don’t know of this price difference is still the case, or if SG even uses dealers now, but it might be something to check into.
JKJ
Quote:
Originally Posted by Lee Schierer
First set of SGT tires lasted twenty years on my Delta 14". Replacement set only has a couple years on them. Check out "Blue Max" tires also
I recently used their tires on my Laguna 14 and they fit and worked well. When I talked to their customer service they offered to cut the tire to the nearest 1/16 if width is a problem.
I see what you mean. They were about $2 a pair cheaper from a reseller. However, I understand that Sulphur Grove Tool will cut them down if needed. My wheel rims are not quite an inch apart. I'm not sure the reseller would do that.Quote:
Originally Posted by John K Jordan
Just installed their new tires on my 18" jet bandsaw. Very good result and good company to work with
I just ordered new tires from Sulphur Grove. The tires were 36.95 for the pair, no tax and no shipping.Quote:
Originally Posted by Lee Schierer