Printable View
Hi,
Our floors made absolutely zero noise for 20 years. Literally, none. Trujoists and 3/4" ply, dehumidifier, etc. No noise. none.
We had our floors refinished and now they are crackling with some popping. Sort of sounds like crunching.
Like if you put sand on the floor, then a piece of wood and step on it, sound.
The guy who refinished them said, "give it thirty days and walk on it a bit"
It has been 60 days.
Any ideas on what caused this? Any ideas for fixing?
thank you all
Sure. When you finish or refinish floors that are already laid, the finish gets down in the tongue and groove and effectively acts like a glue. When you walk on it, the stress breaks the bonded pieces of flooring free and you hear a crack. Should go away in time, but you need to walk on it and possibly let it go through one season to cycle.
Prefinished flooring doesn't do this as the boards don't get stuck to one another.
Thank youQuote:
Originally Posted by Andrew J. Coholic
The floors were finished before and the finish was sanded off and then Rubio Monocoat was applied
Even with a monocoat finish this procedure happens (that you wrote above)?
Not familiar with that finish. But it would happen with any hardening finish.
well, at least I have hope now :) thank you!Quote:
Originally Posted by Andrew J. Coholic
Now... let's say 18 months goes by and it is still happening.. then what? (Trying to prepare worse case scenario)
burn the house down its a lost cause :)Quote:
Originally Posted by mike waters
ahaahahaQuote:
Originally Posted by David T gray
thanks for the laugh haha.
Neighborhood Dance Party. Marc
earplugs?
Ours did that after I put them down, they don't now. I didn't notice when it stopped-- it was four years ago that I laid and finished the floors. Now we just have the squeaks and moans typical to an older house.