2 Attachment(s)
Drawer divider not square
I am about to make the drawers for a cabinet and have not yet cut the drawer fronts.
Which is the better fix if one drawer divider (not yet glued in place) isn’t quite square? Cut the drawer front and back to fit the opening at a slight angle or make the drawer square (and slightly oversized on the corner that isn’t square) and then plane the whole side after glue up to fit? The case is already glued up, so I can’t really re-do the dovetail for the divider.
Hopefully the photos show the problem.
Attachment 426604
Attachment 426605