Extreem Outdoor Table - Africian Mahogany

This is my second table for the outside dining area.
Attachment 271204
African Mahogany Top
Attachment 271205
Cut my 6x6 and did a lap joint on the cross members
Attachment 271206
Cut up another of my wife's cutting boards from the kitchen. Cut into squares and beveled edges. Counter sunk Screws. Cheapest way to get poly carbonate feet for table. Cost of board at Wal-Mart $2.97
Attachment 271207
Attached Cross Members to Legs
Attachment 271208
Clamped a couple boards to top cross member to hold it while I clamped it.
Attachment 271209
I am using 1/2 Inch x 12 inch Lag screws. Pre drill with 3/8" bit and then use impact drive to attached. This is easier than driving a nail.
Attachment 271210
Clamped in place ready to drive Lag Screws in.
Attachment 271211
Holes for umbrella. Wind will not blow this over ever.

Thanks for not having pictures of bathing beauties sipping margaritas under the waterfall!

Almost too nice to be outside. Great table.

That is an absolute masterpiece! Very admirable!

Aside from the beautiful table, that's one hell of a landscape job you got there!