Originally Posted by
Mark Bolton
Most anyone who runs one of the CB75F's swaps out the motor. A resaw with a 3" blade capacity is anything but a hobby level machine. Not a heavy production resaw by any means, at that level your in the big iron world. If you havent seen one run you'd likely be suprised at the resaw speed for a small machine. That said they are not a horizontal production resaw either. It depends on what your throughput, material size, and demand is. Without pointing it out, my point was I dont care if you find five people that have had decent results with the machine posted there is an extremely high potential for a painful experience/boat anchor for 9K which was why I suggested an alternate.