4 Attachment(s)
New fence for vintage radial arm saw (RAS)
I’m an avid user of the “radio alarm saw” and generally have mine tuned to the nuts and set at 90 . Now while it does hold all of its other settings it is generally a pain in the ass to do miters with . This Fence tries to remedy that by incorporating a standard miter.
Attachment 391087
Now at first glance it looks just like a regular wood fence with the typical kerf Cut up the table To avoid Sawdust fouling of the work. But if you look closely to the left you’ll see a slot in the table for a miter .
Attachment 391088
It’s location here is in it’s typical arrangement for regular 90° work . And makes for a continuously Ridgid fence. What’s deceiving here is that the miter lifts off a tongue and groove and works by locateing on a slot in the fence
Attachment 391089
Attachment 391090
Here it is in action
https://www.youtube.com/watch?v=j25c...ature=youtu.be