Mel Fulks
Contributor

Every time we get one of these ...I think of the old oft used TV plot where a plane pilot keels over at the wheel....er..”stick”, and a passenger...

Yep, the out feed table must go up a little more. Use tiny steps and you will get there. If you go too high,you will have to drop down and start...

Thank you for the reply, Erik. I placed the order through JuanCarlos Puente. I just saw his reply. The order was "lost in cyber space". The...

The saw is probably underpowered for that blade. If not underpowered, it certainly seems unable to apply sufficient tension for that blade. ...

Felder e-Shop

The pictures were loaded to SMC for public viewing. I have no idea why they show up for some people and don't show for others. This has happened...

John,thanks. I tried a “reducer “ ,long time ago, It would not dissolve the flakes. But I’m not saying that none of them will work. I do think...

Could have been caused by someone fighting it. Remember anti- windmill arms have come a long way since Don Quoxite. Or maybe the guys who...

I’d get another realtor. People sometimes act like dogs in checking out houses . A dog always thinks a used dog house “smells bad”. One of the...

Nice work. I’ve made lots of footage of what I think was just like that. But I was using machines. That pattern was called “Richmond Rail” and they...

The owner is delighted with it. He's like a kid in a candy store now. Things started out with him just wanting to get it done no matter how it...

Agree with Mark. My guess is they they were just wiped off on both sides after use with damp cloth, then hung from ceiling so that air would be same...

I hear you, Jim. Expensive lesson to buy a blade the bandsaw can't effectively use. Anyway, I set up the DIY tension gauge, spaced at 5" OC. ...

Just finished a tension gauge. And I made an Excel spreadsheet for easy calculations. Before starting the design, I put a couple of rare earth...

I don't feel so bad now. I "only" paid $5K for my JP, which had no cord. Plus, it wasn't set up properly.

The wood often moves to straighter when you face the convex side. You have to be careful. Set jointer for just 1 /16th.

Yes, buy a SINGLE FLUTE router bit.

Pretty much the same experience for me, Randy. First Festool I bought was the Rotex 125 along with the CT26 DC. But the Rotex was a bit much for...