Art Mann
Contributor

Does 0.1 degree really make that much of a difference? Suppose you are cross cutting a 12 inch width plank. If the saw is 0.1 degree off, then the...

Is it correct to say that the blade does not remain perpendicular to the table as the arm descends? That is what it sounds like but I am like Pat...

The person from whom I purchased my Grizzly G0715P rewired it from 240VAC to 120VAC. I plan to convert it back but so far, I have operated it on a...

Your choice of lumber size seems like huge overkill to me. Kayaks weigh less than a hundred pounds but your proposed structure will support thousands...

Come on guys! The original poster stated that he currently owns a Ridgid 3650. He is bound to know what it is like to use a low power table saw. I...

Sounds to me like the real problem is that the State legislatures in the Exception States are creating rules that limit consumer choice rather than a...

Most commercial "wiping" varnishes are a blend of oil and varnish. Also, at least one popular home recipe for wiping varnish contains boiled linseed...

Natural gas (methane) has exactly two combustion products. Those are carbon dioxide and water. How is that different in one environment versus...

Old growth cypress is another excellent choice if you can find it. There are 30 year old duck boxes made out of it still in service at the wildlife...

Apparently, they prefer that their citizens consume natural gas by using electricity from natural gas fed power plants in other States rather than...

There are other substantially cheaper alternatives to Hammer or Felder. I own a Jet JP12-HH that works well for me. I had issues to start with but...

I must confess that I didn't read all the previous posts on this rather simple question but I will tell you why I went from a 6 inch jointer to a 12...

I make and sell trivets in hardwood carved with a CNC router. I have done extensive testing in my own house using various finishes and hot casserole...

I am not sure whether it would be cost effective but a lot of us could do the cutting using a CNC router.

Think about it. If a manufacturer could get more out of a compressor by simply installing a different pulley, they would already have done it. The...

Hey, Tesla published information on the towing "feature", not me. I just pointed out its lack of relevancy.

The specifications probably don't note this but I saw a Youtube video in which the Tesla was used to tow the maximum rated weight. It lasted for less...

If it is Watco brand Danish Oil, it already contains some varnish. It probably does anyway, regardless of brand. I think it would be preferable to...

Not only do I doubt you can get all the old paint and wood oxidation off, I don't think you can buy a clear coat finish that will last even a year.