Doug Garson
Contributor

If Wagos are approved to be used in code applications, I would expect that the manufacturer would have to provide documented extensive testing to...

Hmmm, I'm picturing 3" of wire coming out of a junction box and getting my head and the pliers and my arm between the wall and the end of the wire so...

Counterclockwise?

Rather than leaving food on the floor which attracts mice, and then catching and releasing them I use ultrasonic pest deterrents near the doors to...

Aren't wire nuts made with right hand threads? Won't twisting the wires counterclockwise then twisting the wire nut on clockwise untwist the wires?...

Before opening up any boxes I would pick up a receptacle tester and check every receptacle. ...

I assume the purpose of the timer is to prevent the heater from coming on when electrical rates are high (assuming you have variable rate billing)....

I'm guessing over the decades there have been more than one style of fence on Powermatic saws. Suggest you post a picture of your saw and fence...

That's a good one. Tried it and like it. Way better interface than Adobe. Thanks for sharing!

I think the Texas incident was more a message that the power grid needs to be upgraded and interconnected with the rest of the country. Better...

Don't follow your logic in this case. If we were talking about Alaska and people who moved there from Texas then yes the transient population...

Can't offer to help you out but I'm in the process of trying to make one based on this video. https://www.youtube.com/watch?v=pEeN6-kFm4g&t=682s. It...

I prefer the Olfa knives with the snap off blades. https://www.amazon.ca/Olfa-5003-Ratchet-Heavy-Duty-Utility/dp/B0006SJAR0

3 things come to mind: - It's possible that it's too much. Not everyone likes seeing wood everywhere and sometimes it just does not look good. Our...

No I'm not with ERCOT, I've just noticed some people trying to blame the power outage in Texas on renewable energy when the real problem is not...

Why are you singling out wind turbines? The majority of the lost power generation capacity was thermal power plants (gas, coal and nuclear). One...

Not a problem, I had a poster in my office decades ago which read "Although you think you understood what you thought you heard me say what you don't...

You are still misspeaking, a featherboard closer to you is normally referred to as "in front of" the blade. It's difficult to get good advice if...

This is good to know. Noted the brand. Bunch of months back I ran into same problem. Methyl alcohol is easy to find but I am always worried about...

I had a Delta 37-220 jointer. Original owner said he bought it from someone else in 80s. Interestingly, it had only one part (pull cover) missing...

Jim's router inlay is also a good option where the knot hole will be visible. You can make it a feature rather than an attempt to hide a flaw by...

I'd fill it for no other reason than it would be easy to do now, very hard to do after the desk is finished.

I also have a 14" Delta/Rockwell with riser and use a 105" blade (my previous 14" clone was the same) I'm sure there is more than enough thread in...

This got me interested! This is what most likely happened. In some Google search or by some other means you clicked on a link that had spanish set...

Tried removing it yesterday. Edge (non-chromium) appears as System App now. No set way to remove it anymore :(

You may have already done this but I would pull the drawer right out, check to make sure there is nothing behind the drawer pushing it out, the check...

I just checked on my work Laptop, and, its back here as well. Appears MS has made its removal very difficult. Will try to find a way, when I am...

I have been part of 2-3 software related patents. Based on that limited experience, I would suggest hiring a lawyer. We would not have been able to...

Lisa has described it pretty well. I actually use it (another program) pretty regularly. I prefer it to inbuilt program in Windows. Photos,...

I use Firefox on both my home and office laptop. On phone I use Chrome and Firefox both. I normally uninstall Edge and few other Windows features. ...