Jim Becker
Moderator

Tom, there are many of us who take commissions but don't earn our living from woodworking. The business concerns are the same outside of scale.

Nope...only about 6 miles "as the crow flies" and the 'Creek is in the same place. My shop moves, too...I'll just have a smaller space for a bit...

Sale pending receipt of deposit.

I was very glad to see your comments this morning that you were taken care of...it's good you now have a keypad that's working correctly. You may...

That was the best decision they could have made here and the end result will be far superior, too.

Plywood because of the environmental stresses that come with RVs that have greater temperature and moisture swings that in most homes.

I do a very careful and tight twist to get a great mechanical connection, snip the end clean and then screw on the wire nuts. If I'm feeling really...

ROFLOL! I will probably be shooting for 20x30 or 24x30, give or take. Some of that comes down to zoning and some to money and appearance. I'd...

For the modern outlets, etc., that have the side clamping mechanism, there's no more chance of contact with the side of the box than with traditional...

In our current home, we have soapstone in the kitchen and honed/antiqued granite for surfaces in our addition. (master bath, guest bath, wetbar) The...

If you price out the maple and factor in your time to mill it and construct the top...$165 can look darn good!

You have a good friend there, indeed!

Do you intend to actually cut directly on the surface? If not, the coating is an advantage. I never cut directly on the top of our island...I use an...

TSP is what is often used for this purpose, but I'm not sure it can be used on bare wood or not...

Just about any appliance you can think of is available with WiFi/BT these days...I mean, you can watch the SuperBowl on your fridge while you make a...

I'm not really worried about it...I mostly cross-cut and I can do that on my MFT if necessary. A lot of the things I do these days are on the CNC, so...

I think your method will be fine for the intended application. These are hung statically and only have to carry their own weight. The corner gussets...

Thanks, Steve. Very nice house (originally custom built) on a half acre...house is about half the current square footage and I will not have to...

I will let The Professor know...

Also, there's no tank here...it's the coils in the unit that would be "more likely" to survive if the unit can be kept active. Of course, having...

These types of fires start pretty quickly so killing power wouldn't necessarily save the situation because there would already be smoldering/flames.

Nice job on those hive boxes, Malcomb. Your customer's honey bee colonies will be living in style for sure! Professor Dr. SWMBO has been a beek...

In the south/warmer areas, it's not uncommon for tankless water heaters to be installed outside because it completely eliminates the venting...

And painting over it is equally "fun".... ---- I'm about to have to deal with old wallpaper in one area of our house that has to come down before...

I found the photos of the chair, etc., I mentioned above...this is Angelus leather dye in both red and black with a matte waterborne clearcoat ...

If you consider any of the major magazines, both still existing and those ghosts of woodworking magazines past, you'll see that they have "cycles"...

yes, you can use the media button to link to a YouTube or other supported video in the same post as the image button no problem. Please note that the...