Jim Becker
Moderator

Yea, if my spam protection at the server doesn't catch something...which is rare...my MacOS Mail app gets 99% of the rest straight into the "Junk"...

What "base" is used also matters, not just what collarant is added

Yea, I agree. The shipping on my slider in late 2022 from Georgia to Pennsyltucky for about 1000 lbs was $1200 and that was with terminal pickup, not...

Making the "windows" is an approachable task, but the opening mechanisms are a different issue, especially since you can't use a simple hinge and...

Many folks with shorter stroke sliders will make use of a ripping sled on their slider wagon to increase length capacity for critical straight line...

Yes, it was released mid-last week. Please note that they are offering the upgrade at the "old upgrade price" until 30 April 2024. After that, it...

These are well known phishing payment scams. DO not respond. DO not click on any link "in" the message. If you are concerned about a "payment" go to...

I didn't have any dowel stock appropriate for the need but do have a good quantity of Total Boat resin, so that's what I went with. Since the issue...

I don't have any issues with labels from my P-Touch sticking to anything, for the most part.

If you use Aspire 11.5x or greater, I can send you the files. PM me your email. You'll just need to change your post processor and tweak for your...

Jimmy Diresta's latest video project is a nice exercise in metalwork, including some things he's not done previously. Two metal shop stools.

Sadly, three panels...so one complete cabinet and one half. But the recovery worked just fine and I slapped myself up-side my head to insure I don't...

David, if you do a ton of narrow component sanding, then yes, the smaller 125mm/5" format is going to be easier to keep things flat. But in general,...

Wow...nice haul on that lumber, Rod! I've be coveting those wide boards for sure. :) I actually spent quite a bit of time in the shop this past...

There is also the aspect of actually physically and safely moving that weight through the cut (sled required for safety on something like this) and...

I don't believe that there have been many changes at all to the venerable S45 over the years and it's still made today, AFAIK. It's the one bandsaw...

I've thought about that a few times, but ultimately decided that this is my hobby "now" so it's not worth worrying about it. My one compromise is...

Tesla eventually "closed" their offer and started requiring their own solar roof or panels, if I'm not mistaken, in order to buy the PowerWall...

For metalworking (and some interesting woodworking) Pask Makes is a good channel.

Just one thing...the 9 hole pattern with a center hole (for better dust extraction) that Festool uses isn't really "proprietary" and all the major...

It would be highly unusual for me to need to borrow a tool from someone else since in my very small circle, I'm the one with the tools. I have...

Yea, my labels have gotten "more detailed"... 'cause remembering is harder. LOL

There are already two existing threads on the Graco Ultra Quickshot. The answer to your question is yes, you can shoot clears just fine with the...

Many dealers tag on "Documentation Fees" these days and that's beyond the fees for the registration, etc. They are essentially profit boosters. You...

As noted, the fix worked fine. For a few holes that magically were not fully filled with the resin (likely migrated into the plywood), a little hot...

I hesitate to comment because I'm not an expert, but I seem to recall that folks who are very familiar with the NEC have previously posted that there...

Outstanding!!!!! I hope that some good referrals come from that, too.

Thanks for posting the photos. Click the icon for "Theater Mode" at the bottom, right of the video you are playing to remove the stuff to the right...

Generac actually has an excellent battery backup solution...I considered it for here (along with solar panels), but in the end, I decided we would...

Mike, to use an existing circular saw with the same kind of track that most "track saws use", you'll need some form of adapter like Richard mentions....