Jim Becker
Moderator

"Drying Tent". You need air flow, preferably from the prevailing winds, so if your tent isn't just a "top", you're going to have continued moisture...

You could certainly use dyes, etc., to emulate the tone of a specific piece of white oak, but you'd want to choose a species that's going to provide...

Seal with Anchorseal (you can get it by the gallon on Amazon) and as Izzy recommends, get it sawn as soon as possible so you can stack and sticker in...

"Holy Price Difference, Batman!" Sheesh...you need to find a friend across the border to take deliveries for you!

Yes, in general, that's exactly what you want. There have been a few examples of this posted over the years...I could be wrong, but I believe that...

Yea, if my spam protection at the server doesn't catch something...which is rare...my MacOS Mail app gets 99% of the rest straight into the "Junk"...

What "base" is used also matters, not just what collarant is added

Yea, I agree. The shipping on my slider in late 2022 from Georgia to Pennsyltucky for about 1000 lbs was $1200 and that was with terminal pickup, not...

Making the "windows" is an approachable task, but the opening mechanisms are a different issue, especially since you can't use a simple hinge and...

Many folks with shorter stroke sliders will make use of a ripping sled on their slider wagon to increase length capacity for critical straight line...

Yes, it was released mid-last week. Please note that they are offering the upgrade at the "old upgrade price" until 30 April 2024. After that, it...

These are well known phishing payment scams. DO not respond. DO not click on any link "in" the message. If you are concerned about a "payment" go to...

I didn't have any dowel stock appropriate for the need but do have a good quantity of Total Boat resin, so that's what I went with. Since the issue...

I don't have any issues with labels from my P-Touch sticking to anything, for the most part.

If you use Aspire 11.5x or greater, I can send you the files. PM me your email. You'll just need to change your post processor and tweak for your...

Jimmy Diresta's latest video project is a nice exercise in metalwork, including some things he's not done previously. Two metal shop stools.

Sadly, three panels...so one complete cabinet and one half. But the recovery worked just fine and I slapped myself up-side my head to insure I don't...

David, if you do a ton of narrow component sanding, then yes, the smaller 125mm/5" format is going to be easier to keep things flat. But in general,...

Wow...nice haul on that lumber, Rod! I've be coveting those wide boards for sure. :) I actually spent quite a bit of time in the shop this past...

There is also the aspect of actually physically and safely moving that weight through the cut (sled required for safety on something like this) and...

I don't believe that there have been many changes at all to the venerable S45 over the years and it's still made today, AFAIK. It's the one bandsaw...

I've thought about that a few times, but ultimately decided that this is my hobby "now" so it's not worth worrying about it. My one compromise is...

Tesla eventually "closed" their offer and started requiring their own solar roof or panels, if I'm not mistaken, in order to buy the PowerWall...

For metalworking (and some interesting woodworking) Pask Makes is a good channel.

Just one thing...the 9 hole pattern with a center hole (for better dust extraction) that Festool uses isn't really "proprietary" and all the major...

It would be highly unusual for me to need to borrow a tool from someone else since in my very small circle, I'm the one with the tools. I have...

Yea, my labels have gotten "more detailed"... 'cause remembering is harder. LOL

There are already two existing threads on the Graco Ultra Quickshot. The answer to your question is yes, you can shoot clears just fine with the...

Many dealers tag on "Documentation Fees" these days and that's beyond the fees for the registration, etc. They are essentially profit boosters. You...