Jim Becker
Moderator

Festool, Makita and now Milwaukee use compatible tracks. I "think" Mafeil is also compatible, too. DeWalt has its own design track which is very...

I missed this thread previously. One thing I want to mention is that right now in my temporary shop, I have my BenchDog Cast iron router table top...

{rolls eyes} about the nailing...

I believe that's the cost with the Packout, etc. They will be offering the bare tool, too.

The change in sound level was pretty amazing, Curt. So much so that I'm about to re-lubricate again (one year in) to keep things that way! Garage...

The majority of the "surfaces with lots of holes" that a system like this is designed to create are only a single thickness of 3/4" or 19mm-ish sheet...

For folks invested in the Milwaukee platform, it's a real plus. It's good to have another choice on the market for folks. While I'm a "Festool guy",...

Alan, it's not unusual for there to be limited or no backward compatibility with devices like this in the industry...'nature of the beast. Mesh...

I use Rakuten...formerly EBates. Kind of a similar thing to what Capital One is offering.

The cost isn't huge, Richard, and considering the time savings and repeatability, totally worth it for unique contours like that. Click on the link...

Post 57...pardon the expression. :) https://sawmillcreek.org/showthread.php?298314-Garage-cost-are-you-kidding-me&p=3201111#post3201111

10' wall pre-build panels. That's how Tuff Shed does it.

Grizzly bought the brand and revived it as their "high end" branding.

MDF "shaves" nicely as the holes are bored because it's a composite that has no layers and as as result is structurally different than plywood. If...

Already have that to some extent native to the vehicles...there are other issues (medical) that come into play here. The "spatial visualization" and...

Yes, PH does a lot of things. Some plants have noticable changes as the PH moves...some hydrangeas, for example, will change color based on soil PH.

We do not but understand why it's a good thing to consider...some plants have radically different expectations relative to PH than others for optimal...

Yea, really...that's almost sacrilege! That said, once I have my shop building up, we will, for the first time in our adult lifetimes have the actual...

Curt, when I had the new opener installed last summer by Des-Carr, the technician took quite a bit of time carefully realigning the wheels and track...

I haven't actually seen the "brown" stuff in this area...I was just curious if that was what was referenced.

The better openers, including the jack shaft versions, are unfortunately not inexpensive. That should not be surprising... ;)

I also use the 700 and tight or wide depends on what I'm doing. If I'm using Dominos to keep a table surface glue-up flat and aligned, I do a tight...

Michael, the mess node cannot provide higher speed than the specifications it actually supports. I'll use EERO as an example as I'm more familiar...

Is that the brown one, Adam?

I agree with Edward, especially since you indicated you stained the wood. A thin barrier coat of shellac often has benefits in that respect for...