Jim Becker
Moderator

Any time I've had the "starts but then dies when the trigger is pulled" issue with my MS290, it's been because i, um...tighten the chain up too much...

I believe ToolNut is running promotions this weekend, but do not know if accessories like batteries are included.

I agree with Andrew...for the basic SS overhead collection setup with the small hose, attached it to a vac type extractor separate from the DC...

It's taken a few months, but I now pretty much have a good feel for the induction setup and am very impressed with its responsiveness. In many...

Fortunately, it's a lot easier to meet that requirement these days with PEX...

For this particular part, aftermarket is clearly the easier play. Should you need other parts... ...

Anything using CDMA is pretty much toast. Same for 3G...

Total Boat's Thixo might be an adhesive that will work...contact them and ask for a technical opinion.

That's a really good idea to better leverage all the abrasive!

Happy you got your range, Paul! You're going to enjoy it for sure.

LP Smartside has very specific gap requirements that must be met to have the warranty. There are even tools to help insure those gaps are kept. One...

The photos are so tiny, that I can't see that detail, Johnny. I guess I missed something.

...at least twice!!

It's good usable material for small projects, both built by hand and for CNC work. I acquired a "whole bunch" of excess Tiger Wood decking in similar...

There's no visual of the inside of the legs, but I'd build them "square" and then round over the corner to the appropriate radius using whatever...

A 12 step program for GAS... :D :D :D (Gear Acquisition Syndrome)

The potential issue with a frame is that the frame itself might damage the material being slid over the surface. But yes, maintenance of the machine...

Not familiar with the brand, etc., John. But be sure to read the specifications carefully if these are not waterborne products as you may need proper...

Solidworks now has a "Maker" version that's relatively inexpensive and may be worth trying. April Wilkinson has a discount code available, too. I...

Room for seasonal expansion/contraction that is caulked is a good idea in general. Some modern siding products actually require it. (LP's products,...

I think you missed step 2-B and sometimes 2-C which is to return to the store(s) to buy more stuff/different stuff because you either forgot more...

What's nice about the HDPE, Jeff, is that it's very durable while also being reasonably "slick"...perfect for the application. The biggest challenge...

Always good to test as I noted because yes, some species benefit with the oil vs just the oil based finish. For those of us that don't use oil based...

Greg beat me to it...HDPE strips or a sheet and it doesn't have to be real thick and raise the boards up a lot as rollers would.

The next day is fine if you did the wipe off as noted. But do consider that you're going to get about the same effect from the first coat of an oil...

TIME TO BREAK GROUND for the new shop building. My permit is approved and I just have to pick it up (and pay for it) when it physically reaches the...

Busy can be a blessing, Dennis. :) This past week has been a mish-mash of landscaping and getting started on a quick laundry room remodel. We...

I agree with Andy...I'd choose the long leg vertical for more weight under a narrower shelf and short leg vertical for a wider shelf for bigger bulk...