Jim Becker
Moderator

If the output will be clear coated and there will be multiple pieces that will appear together, logically, one would want the veneer grain to be...

Many of these units come pre-charged...the lines just need to be cleared out with the vacuum. If I'm not mistaken, some "Mr Cool" systems don't even...

That's exactly what I did here in my current shop, Mike...the miter saw is upstairs where the lumber lives. I forget if I took you up there or not...

I will admit that I really like cast iron for the "feel" and vibration dampening. The disadvantage is that you can't "roll your own" and you have to...

I also use my miter saw for rough cutting lumber to length when it's over about 6' long...but that's about it.

There are a lot of tools right now, including a good chunk of Festool's line, that are in short supply and have long lead times. Being locked to a...

Skillz................wow. Nice!

Congrats! You'll enjoy having that thang keeping you comfortable year round for pennies.

Michael, I probably read them once. It's rare I revisit a book, fiction or nonfiction, honestly. 'Glad your package arrived!!

Most of my trunks have double locking casters. For those that are "travelers" I use larger casters so they are more amenable to rolling in less than...

The aluminum version was a good idea for a number of reasons, especially for a 10' ceiling. The wood one here in our current house is somewhat heavy...

HEPA filter on the unit...and then vent back. You will not lose whatever residual heat you have that way. If you vent outside, there's no point to a...

Joe, that's exactly while I'll opt for the SC-3C when I make my move. I'm used to having those "things" with the larger saw and despite the SC-2C...

I have built a number of tack trunks for travel/show use out of the dozens in total produced. Folks do not and will not use the plastic ones for...

Aaron, you should consider venting back into the shop via a non-direct path from your closet. The same area calculation is needed...at least the same...

I can only imagine, Erik. I don't remember any of the machines actually running during that show I helped out in the MiniMax booth a number of...

That's a great step to have completed...things can move along now pretty quickly I would think!

Yea, it's not a horrible practice, Erik, when plugs are available. Otherwise, there "should" be a hard disconnect but a good jolt can certainly jump...

If I actually remember, I'll try to take a close up shot.

John, yes, the buttercups are not good for many kinds of livestock, including horses. Same with other things that "just grow", so folks who have...

Have a conversation with Sam...he can be very helpful in understanding this, particularly as it relates to "what's stocked" here in the US, assuming...

Better yet, just imagine this...cleaning the machine out after letting it run without collection is a thankless task!

The switch can be be helpful to isolate from more minor surgest, but a true lightning hit or major surge can easily bridge that short distance if it...