Well, of course I will suggest my videos, under robo hippy. Most is about bowl turning. I like Mike Waldt, who is from Wales. Not so much technique,...
Very little experience with Ebony but seem to remember that it is an oily wood and, as such, will need to be cleaned with acetone or lacquer thinner...
The metal cutting blades, I think, don't have the set to the teeth that wood blades do. This would mean that you might get clogging while cutting. I...
Well, I was a concrete finisher for 30 years. I used to use popsicle sticks. Some times I would use the core from the foam brushes which were 1 inch...