To replace the veneer it's best to remove it from edge to edge. Here's a repair I did on a cabinet which, fortunately, was only a short section with...
What are you doing, Andrew, that requires a full suit? Spraying 2K products, like GF's conversion varnish, is about the only thing I can think of in...
That makes perfect sense, Carl. But what toolpath strategy do you use to create a taper, for example, when the bit is centered above the centerline?...
I've trimmed at least a mile of wood edge banding with a trimmer that cuts in both directions. If you read the grain, it's easy to know which way to...
Funny, the can of varnish I have actually is from Ace Hardware and it's pretty dark. After seeing the photo you took of Waterlox OSF earlier, I went...