Ron Citerone
Contributor

We had a mouse in our kitchen this autumn. We started seeing him several times a day, yet he never got into any food packages. I set 17 traps of...

Very nice! That maple burl is beyond beautiful.

I guess it’s kind of like this forum. Everything from beginners to experts. I am somewhere in the middle. I try to help beginners and learn from...

I like it. I used some old 2 x 6 pressure treated from a deck rebuild for the legs and apron for an outdoor fish cleaning table and work bench. Has...

I would not paint a ceiling any color except white. I know other people who paint it the same as the walls. I think the room seems to close in on...

Never thought of it that way as I only planned on using the same hinge and overhang. Glad you pointed it out to avoid someone a mistake.

What I did was saved my mockup and when ever I make more I use it to set up a fence. I put the bit into the hole and then clamp my fence against the...

I used to raise the grain on my furniture with a cloth dampened with water, let it dry and did my final sanding. I did this a lot with cherry that I...

Very nice job. Clean and neat. I could think of dozens of practical uses for that piece.

What Kevin said. I ran a few extra pieces of wood the thickness of the door stiles for testing. If you are routing the edge of your doors, rout...

If your going all the way to Hearnes, you might go a little further to Groff and Groff in Quarryville. AMC Hardwood outlet in Marcus Hook PA has...

I think if your neighbor likes it, that's what matters. Your neighbor's brother has no say IMO.

Probably 20. I also have some in my kids houses which are like old friends when I visit.

From you post I am assuming North Jersey. Can't help you there, but if you are South Jersey I have a few spots in PA I use.

It shouts "STRONG!" It will be well received by anyone who is lucky enough to get it.

Massive, Beautiful, Elegant!

Made the 4 drawer boxes for a cabinet that will go into the cottage renovation. This was my first time using manufactured drawer glides and it was...

Well you nailed it! The angles and your choice of wood make a stunning piece.

I would pick out any loose material and then fill with epoxy.

I have an Omron BP5450 and it seems to work well.

My gut tells me manipulations are not going to work. I would think you would be better off using it for small stuff. Others with a lot of live...

LOL. I belong to a shop with several drill press’ but didn’t want to go in because of the pandemic. Saw it on CL and pounced.

Thanks Jim, BTW, the drill press only runs with the chuck key in that hole. Variable speed. I posted it for giggles, but it actually works. Cut...

Nothing hurts quite like closing your trunk door on a Lami that you just built. Don’t ask me how I know. 😫

Flex coat is what I used last time I built a rod. Back then they may have used rod varnish on those bobbers. Not sure if the 2 part thread coatings...

Rod builders use thread wrapping liquids. A rod building supply co would have some.

I would use fly head cement.

No Clue, but seems to me if you could get the price of a comparable machine in working condition you could work backwards. As long as you disclose...

If you have face frames and the back of the runner has some type of brace I would look at that with a flash light and see if anything is going on...