brent stanley
Contributor

Do you have any extra length on the ends you can sacrifice to use for fastening to a jig or similar? B

Ok, that's better. You'll have to make sure the knives for the coping discs match the freeborn cutters of course, and they'll need/want some pretty...

I just reread the description of your doors and they will be very heavy....I would not build them without long traditional or loose tenons.

Thanks Jared, I was certain it was heavier than a Delta "HD" and more capable but a quick glance at the quill assembly, spindle bottom and 1000lb...

You can do it this way with a lighter and/or lower powered machine, but most tenon discs are designed to remove all the material (including the cope)...

Non-corrugated blocks that take HSS and carbide tipped, custom grindable knives are available up to 100mm high in 6mm steel, they're just not as...

The most common size knife for the euroblock in the EU is the 55mm high knife, and that knife collection has hundreds and hundreds of off-the-shelf...

Absolutely, yup.

Please excuse the covid haircut and paunch! If you do the Instagram thing, there's lots of shaper content there too. Cheers, B

Hi Nick, working on my wee little phone, so it's a bit hard to so multiple quotes but I'll try to answer questions one at a time: All else equal,...