That’s an extremely small pipe for an air leak but the fix that is only on a few houses owned by Hvac techs and home inspectors is to put p-traps on...
The button to click for manual entry is too far down the page where they have two choices to decide on. By the time I read all that and selected one...
Downloads from financial companies is either not working or has wrong numbers in several cases. Can’t upload it from a saved form either and get all...
I've only saw one house like that. I doubt it’s allowed anywhere now unless they are using an older code cycle. Codes do differ but not all building...
The big box 6ga copper is only rated for 55 amps. For a 100 ft run it would be best to put in AL wiring, check with electrician or code book for size...
I would charge for the design and detailed quote. The charge is subtracted from the quote if they sign. They can get a cheaper quote elsewhere using...
Plenty of carbon and something on the piston side. No scoring evident. After all this work I’ll be installing new parts. Having trouble with the ads...
I was on there, that’s where I found this to be a common problem with many saws. Some fixes are on there but no help for mine. I’m taking the piston...
It used to get a little hard to pull but now the rope will break if I pull any harder. Saw a video on rebuilding a 55 which has a compression release...
21 yr old Husqavarna 51 has been sitting around most of the time for 6 years. The pull cord assembly is good but takes a tremendous amount of effort...
Some areas have the NextDoor app being used. Down here people are always posting for a house that a relative or friend wants. The problem is that you...
.001 is plenty but if you are using plywood it will vary some. Also I have found that if you measure the dado blades from outer tooth to outer tooth...
Electricians hate AFCIs because often nothing is wrong except incompatible vacuum cleaners and drill chargers etc. On houses under warranty they are...
Find latest posts
View Articles
View Blog Entries