Alan Lightstone
Contributor

Coldest temperature I have ever been in was -35F in Dayton (so southwest Ohio). Colder weather than I faced in Utqiagvik, Alaska on the Arctic...

No doubt it's less than 2000 CFM, but even 1000 CFM will remove all of the conditioned air from a workshop extremely quickly. Not an issue in...

I don't know how much suction a DC venting outside creates on doors, cracks, etc... But that DC is rated for 2000CFM at 3in WC, which is a lot. I...

I almost did that. And still might. The concept just bothers me, though. And the top does need a few more holes. I'm constantly not able to...

Rod: Is the minimum width that a feeder can rip the width of the feeder? In other words, if I want to rip 3" pieces with a 5" deep power feeder,...

:D I've said that in the OR. It usually elicits a solid glare from the surgeon. As I've heard, "The abdomen was opened with copious bleeding and...

Actually a type of cyanoacrylic glue works best on cuts (used to close surgical wounds in hospitals. The brand name is Dermabond). Great stuff,...

I have the larger one, with the under bench storage. I like it, with the exception that mine has the 1" dog holes. I would avoid that one like...

I use magnetic featherboards and either the JessEm guides or my similarly constructed fence for ripping thin cuts on my ICS. Never do without...

Thanks Andrew. BTW, you give a very nice workshop at Infinity. At least before Covid, sigh.... Infinity is a very nice company to deal with,...

Is it possible? I guess. But I was using mine today at 45 degrees.

Now, if they would only swap out the older versions... :rolleyes:

Sigh..... Drives me crazy. Thanks HGTV. Now changing to grey. All those white kitchens are going to look so 2000s...

I forgot to mention that the front set screw is stripped also. For a while I used it exclusively and put the Sawstop on back in a drawer. But the...

The biggest issue I have with the Infinity inserts is that I constantly need to get out my metric Allen wrench to adjust the height as it is...

For kicks, I looked up the MSDS for Supergleit. It is listed as 50-100% aliphatic hydrocarbons and 25-50% white mineral oil. I have no clue...

Fine Woodworking published in their Sep/Oct 2019 issue an article titled "Clean and Contemporary Floating Shelves" which had one of those "I wish I...

I have a Jet 1000B and a 2000. I would avoid the 2000. Too loud, very large, and frankly has flow rates not much different from the 1000. It is...

I'm a very happy owner of a 5HP Oneida. Works great, even with a long run to a wide belt sander.

I'm not sure if you already have the fan, but if not, I'd suggest getting an explosion proof one. Definitely pricier, but can exhaust solvents /...

Varsol's MSDS says its comprised of Mineral Spirits and Naptha. Produced by ExxonMobil. Never heard of it before. Interesting.... Always love...

I just keep mine in the fridge, and haven't had it expire. Bottles I've kept in a drawer, don't last long. But the humidity is very high here,...

I've never regretted having too many outlets. Come to think of it, I've never had too many outlets. I worked for a while with pencil and paper...

Yup. Get the Infinity version with the setup gauge. Makes all the difference. Still a PIA, but looks nice when completed.

Oh, yeah. Without pictures, it didn't happen. You know the rules, Julie. I went from a tricked out SawStop contractors saw to a 5HP Sawstop ICS,...

Using the wrong blade, I have actually bogged down a 5HP Sawstop ICS. So it is possible. With the correct rip blade, it powered through like butter.

Big Classic Hits on iHeart radio, or podcasts, or the Rippingtons.

Could you enlarge the hole on your sander to 5", or make a 2nd hole, then 3-D print an adapter to take a 5" hose and then hook that up to your 5" DC...

I fitted my shop with all Hyperikon, CRI 90+, 4100K bulbs. Couldn't be happier. Yes, more expensive than the cheap stuff, but the light quality...

Felder for stationary tools, Festool for handheld. Need more brands on your poll.