Michael Drew
Member

Thanks again for the input fellas. My thoughts around Gatlinburg, was to be close to the smokies, then we could just take a drive or quick hike...

I'm pondering whether or not to stay overnight at Gatlinburg and wander about a bit. We are staying two nights at Asheville. Spend a few hours at...

The BB I've seen where I live, is only available in 5X5 sheets. It's 13 ply. The same vendor also carries Russian Birch, which is also 13 ply and...

Anyone actually stayed at one of the Biltmore hotels on the property? Ate dinner at the Inn? Dress code recommends a jacket/slacks. We were not...

No experience with the brands mentions, but I did buy a pin nailer last year, and use it more frequently than I thought I would. It's great when I'm...

Sometimes, a Sawzall is the only tool that'll get the job done. When I worked as a framer, I used one daily. I still have one, but it rarely sees...

Thanks again for all the great help, folks! Myrle beach is off the list. We'll stay in Charlestown a day or two longer with that deletion..... (I've...

Good input. I might just drive through the area then. I have a coworker that convinced me to visit Myrtle Beach. I was stationed in Virginia Beach,...

I sure do appreciate the input! Glad I asked. I am taking notes and putting together a plan. Wish I had more than two weeks...... It was about a...

Thanks. Natchez Trace pinned..... I wouldn't say I'm all that into the civil war. I have studied it, a lot. I would say I'm more generally interested...

Thanks Lisa. Chattanooga is also on the route. I forgot to mention it. I am literally dropping pins on Google Maps now, picking a route for the trip....

I have had some luck with Meguiar's Microfiber paint correction system....

If you are looking for quality receptacles, look for "hospital grade". I would suggest running four conductors to the J-boxes that will house the...

Where do you all find Johnson's paste wax? I see it mentioned quite often for use on cast iron machines, so when I think about it, I look for it. But...

Thanks guys. Yes, AK does tend to have a bit of a price adder on most things, but that's largely due to shipping. Dave - I have an 8" Laguna in...

Derek, Appreciate the pictures and jig ideas. I had already bookmarked your site, and had planned to steal some of your designs. I actually...

Thanks for the offer Tom. I did post some pics earlier. The ball is for applying some upward pressure on the nut, forcing it to sit flush with slot....

I also use those micro jig push blocks. They are also great to use on the router table for small parts. Can't say too many good things about the...

That's a great idea, Steve. I'll look into it. I think I found some nuts that will work. Not the 'roll in' type, but I think I can make them...

And of course, shipping to a store in Alaska is not an option.....

That's a good sized glue up. I'd probably do it in stages. Maybe glue up three sections, then join those? I'm limited to what I can flatten with my...

You used an Incra fence for your jig? I'm still musing over using different extrusions that I have on hand.

I found out the same thing not too long ago. I live to have some around for shop furniture. Used to get it at the big box stores. No longer available...

I want the ability to position the forward piece of the jig anywhere I want on the table, verse being forced to use the foward fence. The runner in...

I want to drop a jig onto the slider, as most do, but to also have the option to "lock it down" anywhere on the length of the table. There are other...

I just wanted a few for use with jigs, like a F&F. I want to leave them in the slider T-slot, but they would be self centering, and somewhat snug...

Not quite, but real close.