Remember, no two sheets are the exact same thickness. Prefinished or not. 2 coats of conversion varnish on both sides will definitely affect the fit...
Isn't a bit still not defined or measured yet? At the rpm a shaper runs, a couple of thousandths will completely go unnoticed. Actual running time on...
Epoxy sets through an exothermic chemical reaction. That probably softened the adhesive and it came loose. Blue tape hardly has any adhesive on it to...
Tear out is most often operator error in my opinion. Any kind of steel right off the grinder will cleanly cut wood. I mean the Egyptians turned wood...
Not as much snark as this post. I'll guarantee there are people using that exact chisel and it's fine for them. What would you call complaining about...
I prefer used coffee grounds to fill knot holes and dark colored spots. It makes a variegated color and the hole doesn't look like it was filled with...