michael langman
Contributor

It pays to use good grease to lubricate the caliper pins and the grooves in the calipers the pads set into. I bought a pint of stabila synthetic...

I have an IR single stage, 60 gallon, that I used for auto work and sandblasting and it has held up well. If the compressor you are interested in is...

I have a 9" Rockwell contractors saw that was in like new condition when I bought it after getting my house. I like it because it is a little...

I have been thinking of getting the back issues on dvd. I have many wood working books and still like reading different things about wood working.

I was watching some Phil Lowe videos, The Art of WoodWorking, and he did 2 videos on beginner carving, and some exercises, he explains how to do, to...

Have you thought of getting an outdoor boiler? I know it is a big expense, but it will pay for itself over time.

If the pipe did not have water flowing down it, could you cut the pipe from the inside out if it is vertical?

I went online to find a 1/4" x 24 TPI tap and found one at ,Mutual Screw & Supply. I will check the screw size when I go down to shop tonight. I...

The only one I use is a stanley that has a fixed replaceable blade. It is so much better to use then the retractable ones.

Someone mentioned Phil Lowe passing, and I just spent the past few days watching him teach his wood working skills ,"The Art of WoodWorking", on...

MTO did my NIMh batteries in my 14V Makita drill quite a few years ago. Still going strong.

I use my small shop vac with my 1013 and the tapered end of the vac extensions fits into the dust port on the 1013.

I also use these and highly recommend. A little pricy, but they go on easy, stay on and you can buy replaceable cleats. They are a necessity at my...

Just saw the table John. You did a fabulous job on everything. It is nice to hear that someone enjoys the outcome, of your years of experience in...

I got out my block plane and went over the edges of plywood I used for my tablesaw sled after removing a small dagger type splinter from my finger...

Happy Birthday Sawmill Creek, and a big Thumbs Up to Keith , his Mrs., and all who volunteer and participate in its future.

Another beautifully, artistic piece Edwin. Your work is really reaching the limits of, this is really as good as it gets.

This quote speaks volumes to my wife and my life. The more I try to help, the worse it gets. My wife and I have a very good and lasting...

This is such a good topic you have brought up Rob. And I can so relate to all that is said here. I have been trying to do some type of wood working...

You don't have to apologize for preaching Ron. You have given us some excellent advise that is extremely important, and, as you have said, often...