As long as the small compressor maintains the required CFM at 40 PSI, it will spray fine. It will just be noisy...but even my 60 gallon unit comes on...
That's an excellent point. It's not quite as good as foam directly to the roof because there's going to be a small air gap "just because" between the...
Even if you don't actually condition the space, the insulation is going to make the building a whole lot more comfortable and make temperature swings...
So other than the last photo, those recesses appear to have been there when the top was cut/milled. The fact that there's no frass makes me wonder if...
IF the roof deck wasn't old cedar shakes and was plywood or solid boards laid out as a closed deck, I wouldn't hesitate to use closed cell spray foam...
Yes, I use the Qualspray gun and PPS system and I love it. You're welcome to come over and take a look at the gun if you get some free time to do so...
In addition to Quincy that was just mentioned, the higher end IR units are also worthy, IMHO. I have one of their more basic 60 gallon units and even...
Yes, that's true. If you're doing metal work, you'll want an appropriate surface for that work, but a removable woodworking optimized table is still...
I always considered Keith my mentor as well as my friend. When I was first starting turning he emailed me and offered encouragement because he could...
It's really important to consider board width and grain pattern as part of your shopping list to insure that the material meets your intended purpose...
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.