Pointless or not, the market has been divided like that for awhile. There are lots of Cat 1 implements that are specifically marketed for Sub-compact...
1st coat of varnish has dried, been hand-sanded @180 grit....I need to take an old T-shirt to the shop, later...and rub down, wipe off the table and...
One fly in the ointment...availability.....whereas one can buy a #45 almost every day of the week and have it shipped.....and NOT have to worry about...
It's only going to be very small logs, however, Keith. The BX can only lift about 200 kg/460 lbs and that's keeping things down low. (Dave, you need...
Mark, venting outside isn't going to happen because this will be conditioned space, but yes, I'll be doing careful calculations to insure the return...
That's not unlike the solution I did at my old shop and will do something along the same lines for the new shop. One suggestion is for you to put it...
On the later models, Stanley added a way to micro-adjust the fence....They also went with a rosewood fence...Older ones, the rods were threaded into...
Some drill/driver systems come with an attachment specifically designed to place a hole or drive very close to the edge/corner. Mine is Festool, but...
This reminds me of the many thousands of homes in the two Levittown PA (and likely the same in Levittown NY) that were all on slabs with both radiant...
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.