I found out that a guy I know has a 1/4" x 24 tpi tap and also has the brass rod to make me a new knurled thumb nut from...!!! Looks like I could be...
I ordered the Router Plane cutters from Lee Valley. The 1/4" cutter fits perfectly in the router plane. One router plane working. Now to find a local...
For the modern outlets, etc., that have the side clamping mechanism, there's no more chance of contact with the side of the box than with traditional...
In our current home, we have soapstone in the kitchen and honed/antiqued granite for surfaces in our addition. (master bath, guest bath, wetbar) The...
Do you intend to actually cut directly on the surface? If not, the coating is an advantage. I never cut directly on the top of our island...I use an...
Just about any appliance you can think of is available with WiFi/BT these days...I mean, you can watch the SuperBowl on your fridge while you make a...
I'm not really worried about it...I mostly cross-cut and I can do that on my MFT if necessary. A lot of the things I do these days are on the CNC, so...
I think your method will be fine for the intended application. These are hung statically and only have to carry their own weight. The corner gussets...
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.