Steve Wurster
Contributor

The holes / pins are part of the braking mechanism, from what I understand. Yes, the arbor has pins, so the blade has to have holes in the...

If you're able to find a blade with the correct center bore (30mm in this case), there's a good chance it already contains the pin holes for...

I use the Felder "Silent-Power" blades in my Hammer K3, including their plywood blade. They work fine for my needs. I also have the Forest Dado...

I think the main intended usage of that product is for making a sled to rip pieces longer than the sliding table. You can lock the table in place...

Come on, there's a fine coat of dust visible on the DC collection barrel! As for the mess, I moved the then-ongoing project out of the way before...

When that day arrives I plan on hiring professional movers. I might have to build another ramp on the stairs, but that will probably be the easiest...

Yes. I don't have a walkout, so everything is brought down either the interior steps or through the very steep exterior steps that are covered by a...

That's just a little extension table, Felder part number 503-137. I have it setup so it sits directly in front of the crosscut fence when that is...

I have a Hammer K3 79x48 in my 16'x22' basement shop, along with my workbench, an A3-31, two bandsaws, a router table, a drum sander, a drill press,...