Brian Runau
Contributor

If no access to leg and you unable to blow it up and print, seems trial and error is what's left. Cut a piece of mdf, put screws into a piece of...

The rubber piece has a design failure level built into it. As others have said, avoid the catastrophic failure, don't rube Goldberg it without...

Thanks Tom. We probably should have torn it down. I have the roof boards and shingles done. I am piecing the sills back and replacing the boards that...

Identify the wood, spend as much time as it takes to match stain, before you cut anything.

I think she transferred you to the loyalty program line and this is setup to collect membership info prior to connecting you. Std 800 should dump...

I reported this to the FTC. https://reportfraud.ftc.gov/#/form/main

I would be hesitant. I can't find that address in that zip code on zillow and their web site has no phone # as well as it is dated 2023. Language...

Why not through Lowes? Different lower quality design?

Fall work to tune up plants in the landscape. Pick up leaves, get gutters cleaned, I am not allowed on the roof anymore, move snow blower from...

Thanks to everyone. Brian

I just finished a cherry sewing table for my wife. Two legs at 90 degrees about 7 ft per side. two top 30 x 65" or so. I used threaded inserts in...

Anything I sell online I list as " cash and local only." There is no issue of them physically picking up the product. Cash may not be practical in...

Yes, on clarification. I will use wider stock than I need, but milling it to 3/4" thick. I currently cut this in half on my 10" tabletop bandsaw,...

Is there a rubber band clamp fitting you can use to transition? Brian

I did a mock up of a 2" leg and my wife talked me into making it 1-1/2" square.

They are both white oak, just a lot of color variation. On me to be more careful when selecting lumber. thanks brian

Thanks men, much appreciated. Brian

Lee, now that's an idea. I was planning on domino joinery, would this affect the strength of the joint? Thanks brian

Thanks for the education. Brian

On the individual table it may be, but assembled with the two tables, keyboard and top on I don't think it will? Thanks brian

Already Have a bunch of white oak in stock I wanted to use. Thanks brian

Roger, how do you manage this when you drive father than the full charge on the batteries in a give day on a road trip? My wife and want to go...

Tom, thank you for the informed opinion. Sika tech guy told me to use urethane not epoxy. Really 3 years and a redo? Thanks brian

Thomas, I thought about doing nothing, but small investment should make this driveway outlast me, so a good investment. Almost 67 with cervical...

I have a Forest set, good quality. Brian

Cracks are too irregular. Thanks brian