No More Results

11 Visitor Messages

  1. hiya , I saw you wanted to contact me on skype , i declined cos I didnt know who you are , try again on skype
  2. View Conversation
    Dear Mr.Rodney

    I am almost ready to order from the SH-570 (700X500) 60W motorized table. The problem is that I am totally rookie about laser machines (I trying to start now my business) and I would like to advise me some thinks if you can.
    You have to know that most I am going to make cut and engraving in Plexiglas 3mm & 5mm at least for now but later on I will engrave in cylinder too in materials like water glass coffee cup and so. That’s why I want to order the “irregular rotary” as they called.
    I have seen In your post to advise to order different lens. So I ask them about the lens diameter and they answer to me that it is 18mm diameter 40mm focus length is it ok with it? Do I must order something else too (how much diameter & length) and why?
    As for the RECI tube I will order from Shenhui or somewhere else.

    Thank you
  3. View Conversation
    Hi Rodne
    I am wandering if you can help me. I have a problem with lens on my K40 Chinese laser. We only engraved with it for maybe 1hr but the lens at the back has a bad mark on it, like a chip in the middle of it. I'm wanting to know why it happened and how to stop it from happening again? Also are cheap Chinese lenses any good?
    Thanks Maria
  4. View Conversation
    Hi Rodne,

    I am in desperate need of your help. My YAG laser has all of a sudden stopped working, one minute i was engraving, next minute nothing is happening. I press start and the laser current goes down to zero. I can still see the red laser pointer just no laser. Any ideas on this? Your help is greatly appreciated.


  5. View Conversation
    Good day Rodne

    I am looking to buy another machine and since I am very happy with my Chinese machine (a Redsail), I want to buy another Chinese. I want to include Shenhui into my list of options since you are so happy with your machines. Can you please supply the contact details of your contact at Shenhui?


  6. View Conversation
    Hi Rodne,

    I'm Eduard from México. I'va learned a lot thanks to you.. so Thank you! You and other members here in the creek are my laser heroes.

    I have a ghosting or shadowing problem with my spirit deos 30w. I've read in a old post that you fix it this problem very easy.. you say it was a high a trickle voltage.. If you have some time.. could you please explain me how to fix it?

    Thanks in advance! Eduard.
  7. View Conversation

    Was looking for driver, found it, so nevermind & thank you!

  8. View Conversation
    Hi Rodney...Looks like you have several GCC lasers. I have had an MII for almost three years and have not had any real problems with it so far. As far as maintenance and replacement cost, what is your best guess on what it cost you per minute to run your machine? The reason I ask is that I have the chance to quote a job vector cutting a lot of small pieces. I can come up with an hourly for the shop but I want to be sure I include enough for wear and tear. I would appreciate your input.
  9. View Conversation
    What is that new avatar? A reflection of you photographing something?
  10. View Conversation
    Did you get my email ok? It was
    Still looking on your opinion on the Explorer 100w. Thanks
Showing Visitor Messages 1 to 10 of 11
Page 1 of 2 12 LastLast
Page 1 of 2 12 LastLast
About Rodne Gold

Basic Information

About Rodne Gold
Best described as a grumpy old fart.....
Cape Town, South Africa
American muscle cars, drag racing, Photography, high end Audio and Family
Worst one in the world-the Boss


Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
Roland 2300 rotary . 3 x ISEL's ..1m x 500mm CnC .
Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
6 x longtai lasers 400x600 60w , 1 x longtai 20w fiber
2x Gravo manual engravers , Roland 540 large format printer/cutter. CLTT setup
1600mm hot and cold laminator , 3x Dopag resin dispensers , sandblasting setup, acid etcher


This Page
Instant Messaging

Send an Instant Message to Rodne Gold Using...


Total Posts
Total Posts
Posts Per Day
Visitor Messages
Total Messages
Most Recent Message
04-02-2012 2:33 AM
General Information
Last Activity
08-28-2020 8:34 AM
Join Date
Home Page

2 Friends

  1. Bruce Page Bruce Page is offline


    Bruce Page
  2. Gabi Gold Gabi Gold is offline


    Gabi Gold
Showing Friends 1 to 2 of 2