Tab Content
No Recent Activity

2 Visitor Messages

  1. View Conversation
    Hi John,

    I used spiral duct at my shop. It was pricey but I like it. I also like how easily reusable it is (the duct and the fittings).

    I started off with my dust collector mounted on Oneida's stand. I had a couple of wedge shaped wood strips under the legs to account for the downward slope of my shop (which is a 2 car garage). Kept it like that a few years then wall mounted (with Oneida's wall mount bracket) it to gain some height and eliminate a couple of 90 degree elbows in the ducting system.
  2. View Conversation
    Hi John,

    I used 4 casters. I'd say about a 2" caster. I bought them from Home Depot. Yes I did just drill the bottom of the drum for machine screws, nuts, lock washers to mount them. I used clear silicone caulk to seal up the holes.

    I don't know that it's really necessary but I like it ok with the castors on the drum.

    Good luck with it.

Showing Visitor Messages 1 to 2 of 2
About John Neel

Basic Information

About John Neel
Atlanta, Ga
woodworking, hiking, travel, statistics
retired professor; taught statistics, testing theory, research methods


Total Posts
Total Posts
Posts Per Day
Visitor Messages
Total Messages
Most Recent Message
04-17-2016 11:59 AM
General Information
Last Activity
04-08-2021 4:36 AM
Join Date