Caleb Crosby
Member

oh man appreciate that, the angel planer. going to research that over wk end, cheers

I'm picturing them Samurai style like Toshiro Mifune journeying on horseback with some very sharp knives in the saddle bag.

Rubio is a two coat thing mostly and it only bonds chemically with wood fibers so they suggest a rough finish to give the stuff more material it can...

I am fearing that everything you say is true. Thank you for the info on belt sanding machines, good info. Let me just ask this - when you say a high...

Hi Mike, Pls let me know if you can point me to a shop w/ belt sander in town. I'm not a pro but I sand Poplar to 220 but figured nicer hard woods I...

Christian, thanks I clicked thru to the link and learned a lot- but I always like to see it and also found this...

Jamie it's for a coffee table - I'm only concerned with fooling the eye. I know most skills are not 'explainable' but if there's anything you can...

Couple photos, these replies are a big help! The snipe line is 3" from top running across both planks. Backstory here is I'm 62 and tore my rotator...

Sorry Jim, I'm new should have done a better job of reading policy. Thanks for correction instead of removal!

Kevin I'm not a pro woodworker so don't know all the tools you might be referring to but I can't see how you'd workhold an 18" wide slab to any belt....

Hey Mike, I'm in Gentilly on Mandeville. I had wondered about end grain, I guess I could do that but will try to avoid. I'm gonna go to Riverside...

and thanks again, after looking at those woods online- especially the wenge is exactly what I was hoping to find.

Thanks for that John - I'll start looking that way - cheers!

Thanks for that, I had found that and a couple others before I bought - people spoke well of the machines so I thought might be good for 150. This...

Bill - yes people call it a Delta clone - so I had your same thought but the delta is similar but entirely different. Also an old Grizz was mentioned...

Maurice, thank you - thats really what I wanted to know, it looks like a crappy website but they come thru with whats needed - great info - very much...

Maurice, appreciate it, I went there but it looks sketchy, no photo of the manual, no sample page to confirm they have it straight up. Have you ever...