Paul Ricard
Contributor

Joe, thanks for the info, it makes sense now. I am in Europe. The straight slots in jambs is better solution when horizontal tenons are cut in 90...

Joe, thanks for clarifying this. I understand the spindle moulder's support angle is the same as the segments' joint angle, however, in the first 2...

Joe, you've said that tenons should be cut first. In curved sashes, what is the best way to cut tenons? How could template help cutting the tenons...

Yeap, this is where I got the screenshot from.

Joe, Kevin, thanks for your feedback. That photo actually illustrates a test fit of template on the wood. I have indeed in mind that template...

Joe, you are right, they could be used as collars but their diameter is totally different to my tools' diameter and to what I need to work with....

Joe, could you please clarify this? I assume you mean the table rings below. Thanks.

Finally I decided to make my own ball bearing ring of 170mm diameter with 21mm plywood. Also some thick templates will help reach that bearing too.

Joe, yes this is inside sash profile tool which my curve hood can support with adjustable collar. However, it does not support some of my other...

Joe, here is the collar I got from Felder: https://www.felder-group.com/en-us/shop/arc-cutter-guard-sc91606/curve-moulding-guard-sp91612 Below,...

I have the following tool, its diameter=116mm and height=100mm, but don't have a ball bearing tool of that diameter to copy from template. However,...