Dylan ritterbeck
Member

Jen That link to Jeanette Brewer doesn't work. Try this one. https://engravingconcepts.com/ I know Jeanette and her Dad, Roy. Both will be...

If you are buying Baltic birch, a higher grade of plywood, and it is flat when cut then it should remain flat as long as ambient conditions are...

Me too, I'm home based and twice thought I had to do sandblasting. Both times I regretted the decision, though there is no question, sandblasting...

last year I gave my 3 year old great grandson a SAK like mine. There are too many people who have the idea that pocket knives aren't good for kids. ...

I've carried a pocket knife for nearly 80 years. Some of you may remember when kids boots came with a pocketknife. Anyway, for the last 40 years or...

FYI Several years ago Epilog had a serious X axis motor issue which they dragged their feet on resolving. My recollection was that they had used a...

Kev Have you tried Main Trophy? https://maintrophysupply.com/

Have you experimented with the hertz setting in your materials sheet? A higher number will produce a smoother cut. The software automatically...

Thank you Dave. I'll give that a try. Paul, thank you. I'm trying to avoid that but if necessary, we will add a drawer for the chessmen. But...

Dave I'd be happy to send it to you but you need to be a contributor to send pm's. Since you have a 360 I'm sure your machine was pre-adjusted at...

I know zero about RD Works but if that happened on my laser I would look at the colors I used for fill and outline. Most domestic machines require...

I would try newer version of Job Control. I'd be surprised if you found a version that old as there wouldn't be much need to keep it. The latest...

If you have Helix drivers and firmware loaded you should be able to check the machine using a usb cable on your pc. With that you can check the x-y...