Aaron Inami
Contributor

Just coming into this thread now, sorry. There are some people who say that 5" is not going to be that much better than 4". Here are the area...

I know this post is late, I was out for all last week. "soundproofing" is actually extremely hard to do in a garage. I would look more at "sound...

Vevor is a chinese tool company similar to Harbor Freight. They were known for having really crappy magnetic drills, but they have improved with the...

You normally do not want to use the rip fence when using the "slider" to run material through the blade (there is a tiny risk of binding at the rear...

Thanks. I suppose this could be useful if you wanted to modify a miter gauge (like an Incra miter gauge). You could just as well buy the Felder...

Can you provide a URL for this Felder t-track? I'm not sure what you are referring to.

There are a variety of ways to make Fritz & Franz jig. Here's a couple things you can look at: https://www.youtube.com/watch?v=aoAPVQ2sqMc ...

I agree with Jim on the outrigger support. Actually, if you have room, I would just recommend getting the 79x48 model. It's actually on a really...

A couple more examples using the clamp as a back-stop for narrow material:

These clamps actually have a LOT of holding power and they are extremely quick to setup and clamp. I can use two clamps to hold down material and it...

The diamond saw blade is kind of a one-blade solution. If you have to switch it out, then you have to deal with different size kerfs. This means...

I see that you are not including a scoring blade. Even though you are cutting down sheets with a track saw, the main reason behind a scoring blade...

I actually use these in my MFT most of the time because they are quick and hold very well: https://www.amazon.com/gp/product/B0BMVXF9QZ/

I had a large 12" SCMS. It was freakin heavy at 60 lbs and hard to lift/carry around. After I got my slider, I sold the miter saw and have been...

I would say this is all due to the lower CFM on the Festool. With the 36mm hose (1-1/2"), the Festool extractor is only going to pull about 100-130...

Take a look at these videos to get an idea of what things look like once you start filling it up: https://www.youtube.com/watch?v=DYOtuBqG3pA ...

With only the MFT top mounted (70 lbs.), my FAT300 will pump/lift the table very easily and smoothly just like the Rangate. It is when you have 250+...

Even doing a "signature required" shipment is not a guarantee that FedEx/UPS will knock and force a signature. Even after COVID lock downs, both UPS...

A couple of comments on the FAT300 after having it in my shop for 6 months. First, I am happy that I got it. Build quality is great and all that. ...

A lot of times these items will be drop-shipped directly from the manufacturer (i.e. Jet). It depends on how the reseller determines...

I owned the same PM66 table saw which was purchased about 17 or so years ago. That was the best cabinet saw I had used in my life (now moved to a...

I don't think any "low profile" version of a cyclone is going to perform well for separating dust. The idea of a cyclone is to push the dust around...