Aaron Inami
Contributor

Very nice rack! I do see the benefits of having a CNC machine, even though I have no desire to get one. It just seems like cheating, lol. But you...

This has nothing to do with insulation in the walls. These type of walls are made using 2x4 lumber and then drywall screwed onto that (the...

I caution anyone who is looking to mount a cyclone dust collector on the wall. If you are mounting this to drywall/framing, it will create a low...

Looks like Harvey put their G-700 down to $2549 for a couple of days.

Some additional thoughts… Consider getting another tall tool chest so that you can condense all the small tools you have (Pliers, wire cutters, hand...

I went from a 1.5HP single stage Jet dust collector to a permanent duct 5HP Clearvue cyclone and the difference was significant. With a speed...

Most of these grinders have small tool rests "IN FRONT" of the grinding wheel. These are really only good for doing course work or grinding edges...

The Baldor grinders are considered "precision grinders". They are extremely well balanced (no wobbly grinding wheels) and have heavy cast iron table...

"Type 129" is likely just a model number for that particular capacitor. Here's some options for the motor start/run capacitor: ...

You would not normally have your filters outside because you need to have "return air". The dust collector is sucking air out of your wood shop and...

yeah, the cyclones are going to require 8.5 to 9 feet of ceiling space. If you are concerned about Laguna design and support problems, the...

Based on my testing with my 5HP Clearvue Pentz EF5 with a 16" impeller, it will support two 6" drops at the same time (this is the same as four 4"...

Out of curiosity, is there a reason why you placed the sliding table saw at an angle? I would think one would want to place machines as efficiently...

The Milwalkee 5625 is slightly smaller than the Porter Cable: Milwalkee 5625 = 4.14" diameter Porter Cable 7518 = 4.2" diameter If you are...

Jim is correct. I didn't look closely at those numbers, but 3093 CFM is definitely an "escalated number". That being said, I believe the Laguna...

Basically, the impeller size really determines the capability of a dust collector. That being said, larger impellers generally require higher power...

The Harvey G-700 and G-800 will be able to run two 4" hoses at the same time (or one 6"). Whether this is actually two machines is dependent on what...